The translation is temporarily closed for contributions due to maintenance, please come back later.
The translation was automatically locked due to following alerts: Could not push the repository.
Zen

Source string Source string

4/10000 · 4

This translation is currently locked.

English Actions
Package repository
A Fedora repository must be available for the installation. The example in this section uses the public Fedora mirrors as the repository source, but you can also use a repo on the local network provided by NFS, FTP, or HTTP. Repositories can be configured using the [option]#inst.repo=# boot option; see xref:advanced/Boot_Options.adoc#sect-boot-options-sources[Specifying the Installation Source] for details.
DHCP Server Configuration
Installing and configuring dhcpd
Install the dhcp server package.
# dnf install dhcp-server
Create a simple configuration for the dhcp server at `/etc/dhcp/dhcpd.conf`
subnet 192.168.1.0 netmask 255.255.255.0 {
authoritative;
default-lease-time 600;
max-lease-time 7200;
ddns-update-style none;
option domain-name-servers 192.168.1.1;
option routers 192.168.1.1;
}
Test your configuration and address any problems you discover.
[command]#systemctl start dhcpd#
[command]#systemctl enable dhcpd#
[command]#journalctl --unit dhcpd --since -2m --follow#
Add entries to point clients to their bootloader and the server that provides it to your subnet configuration in `/etc/dhcp/dhcpd.conf`. Because DHCP clients provide the server with identifying information along with their address request, BIOS clients and UEFI clients can each be directed to the correct bootloader. Using latest processor architecture option codes, which may be found on the https://www.iana.org/assignments/dhcpv6-parameters/dhcpv6-parameters.xhtml#processor-architecture[IANA DHCPv6] registration page, allows multiple architectures to share a single DHCP server.
# refer to RFC4578 & IANA DHCPv6 for possible arch option values
option arch code 93 = unsigned integer 16;
subnet 192.168.1.0 netmask 255.255.255.0 {
if option arch = 00:07 {
# x64 UEFI
filename "uefi/shimx64.efi";
next-server 192.168.1.2;
} else if option arch = 00:0b {
# aarch64 UEFI
filename "uefi/shimaa64.efi";
server-name "192.168.1.2";
} else {
filename "pxelinux.0";
next-server 192.168.1.2;
}
...
Restart the dhcp service to check the configuration and make changes as needed.
[command]#systemctl restart dhcpd#
[command]#journalctl --unit dhcpd --since -2m --follow#
Installing the tftp server
Install the tftp server package.
Installing the tftp server
# dnf install tftp-server
Start and enable the `tftp socket`. `systemd` will automatically start the `tftpd` service when required.
# [command]#systemctl start tftp.socket#
# [command]#systemctl enable tftp.socket#
Providing and configuring bootloaders for PXE clients
Getting the bootloader files
Get the [package]*syslinux* bootloader for BIOS clients.
Install the [package]*syslinux* package.
# dnf install syslinux
Create a directory for the bootloader files, and make them available there.
# [command]#mkdir -p `/var/lib/tftpboot/pxelinux.cfg`pass:attributes[{blank}]#
# [command]#cp `/usr/share/syslinux/{pxelinux.0,menu.c32,vesamenu.c32,ldlinux.c32,libcom32.c32,libutil.c32}` `/var/lib/tftpboot/`pass:attributes[{blank}]#

Loading…

No matching activity found.
Browse all string changes

Things to check

Ellipsis

The string uses three dots (...) instead of an ellipsis character (…)

Reset

Glossary

English English
No related strings found in the glossary.

8926219 String information

Source string description
type: delimited block -
Flags
no-wrap, read-only
Source string location
./pages/advanced/Network_based_Installations.adoc:100 • ./pages/advanced/Network_based_Installations.adoc:289
String age
3 years ago
Last updated
a year ago
Source string age
3 years ago
Translation file
pot/f35/pages/advanced/Network_based_Installations.pot, string 30