English
Is I2C supported?
Yes, basic I2C is supported.
Is there Raspberry Pi 3 aarch64 support?
Yes! You can download the aarch64 disk images for the Raspberry Pi 3 link:https://archive.fedoraproject.org/pub/fedora-secondary/releases/[here.]
How do I use a serial console?
The serial console is disabled by default on the Raspberry Pi 2 and 3 because it requires the device to run at significantly slower speeds.
To wire up the USB to TTL adapter follow link:https://learn.adafruit.com/adafruits-raspberry-pi-lesson-5-using-a-console-cable/connect-the-lead[this guide from Adafruit]. You'll need a 3.3 volt USB to TTL Serial Cable like link:https://www.adafruit.com/product/954[this one from Adafruit].
To enable the serial console follow the specific steps for the Raspberry Pi 2 or 3 as they both differ slightly:
*Raspberry Pi 2:*
Insert the microSD card into a PC
On the VFAT partition edit the `config.txt` file and uncomment the `enable_uart` line:
$ enable_uart=1
On the boot partition edit the `extlinux/extlinux.conf` file adding `console=tty0 console=ttyAMA0,115200` to the end of the append line so it looks similar to:
$ append ro root=UUID="LARGE UUID STRING OF TEXT" console=tty0 console=ttyAMA0,115200
Safely unmount the microSD card
Insert microSD into Raspberry Pi, connect serial console, power on
*Raspberry Pi 3:*
On the boot partition edit the `extlinux/extlinux.conf` file adding: `console=tty0 console=ttyS0,115200` to the end of the append line so it looks similar to:
$ append ro root=UUID="LARGE UUID STRING OF TEXT" console=tty0 console=ttyS0,115200